How to set up ENEBY 30 Bluetooth speaker

Connect the power cord to ENEBY speaker and to the main wall outlet.

To turn on or off, press the knob on the front of the speaker.

On your mobile device, go to the Bluetooth menu and look for ENEBY 30.

You can also connect your device directly to ENEBY with the AUX-in using a 3.5mm audio jack.

Turn the knob to adjust volume.

How to change sound settings on ENEBY 30 Bluetooth speaker

Turn on the speaker, then press and hold the knob for 3 seconds. Now you can adjust the bass setting.

Press once more to change the treble. Press again to confirm your settings.

To reset the speaker settings and forget all connected devices, press and hold the knob for 10 seconds.

How to set up ENEBY 20 Bluetooth speaker

Connect the power cord to ENEBY and to the main wall outlet.

To turn on or off, press the knob on the front of the speaker.

On your mobile device, go to the Bluetooth menu and look for ENEBY 20.

Through Bluetooth, you can connect up to eight devices to ENEBY speaker.

You can also connect your device directly to ENEBY with the AUX-in using a 3.5mm audio jack.

Turn the knob to adjust volume.

To make your speaker portable, attach the handle and use the ENEBY battery pack (sold separately).

How to change sound settings on ENEBY 20 Bluetooth speaker

Turn on the speaker, then press and hold the knob for 3 seconds. Now you can adjust the bass setting.

Press once more to change the treble. Press again to confirm your settings.

To reset speaker settings and forget all connected devices, press and hold the knob for 10 seconds.

How to set up ENEBY portable Bluetooth speaker

Insert three, rechargeable LADDA 900 AAA batteries. You can open and close the battery lid with a coin or similar.

Press the on/off button for two seconds to turn on the speaker and enter the Bluetooth mode. On your mobile device, go to the Bluetooth menu and look for ENEBY Portable.

You can also connect your device directly to ENEBY with the AUX-in and a 3.5mm audio jack.

To charge the LADDA 900 AAA batteries inside the speaker, use the included USB cable.

How to set up ENEBY built-in Bluetooth speaker

Insert three, rechargeable LADDA 900 AAA batteries. You can use a screwdriver to open and close the battery lid on the bottom. Use the included USB cable to charge the LADDA 900 AAA batteries inside the speaker.

You’ll need a hole saw if you want the speaker built-in to a piece of furniture.

To turn on the speaker and enter the Bluetooth mode, press the on/off button for two seconds. On your mobile device go to your Bluetooth menu and search for ENEBY Built-in.

You can also connect your device directly to ENEBY with the AUX-in using a 3.5mm audio jack.
ENEBY support image 1
This quick guide shows you how to set up, install and start enjoying your ENEBY built-in Bluetooth speaker.

How to install ENEBY stand

You can easily mount ENEBY 20 speaker and ENEBY 30 speaker on the ENEBY stand, with the two included bolts.
ENEBY support image 1
This short video shows you how easily you can start to use the ENEBY stand with your ENEBY Bluetooth speaker.

How to install ENEBY wall mount

You can attach ENEBY 20 speaker and ENEBY 30 speaker to a wall with the ENEBY wall mount. Always use screws and plugs that are suitable for the material in your wall.
ENEBY support image 1
A quick look at how to use the ENEBY wall mount to fix your IKEA ENEBY speaker to a vertical surface.

Back to top
+
X

Back to stock notifications

Be the first to know when [itemName] is available again:

Alert has been set correctly

You will receive an email when [itemName] become available again